S. Xing and H. Guo, “Temporal phase unwrapping for fringe projection profilometry aided by recursion of Chebyshev polynomials,” Appl. Opt. 56(6), 1591–1602 (2017).

[Crossref]
[PubMed]

F. Lü, S. Xing, and H. Guo, “Self-correction of projector nonlinearity in phase-shifting fringe projection profilometry,” Appl. Opt. 56(25), 7204–7216 (2017).

[Crossref]
[PubMed]

R. Zhang and H. Guo, “Depth recovering method immune to projector errors in fringe projection profilometry by use of cross-ratio invariance,” Opt. Express 25(23), 29272–29286 (2017).

[Crossref]

Y. Lu, R. Zhang, and H. Guo, “Correction of illumination fluctuations in phase-shifting technique by use of fringe histograms,” Appl. Opt. 55(1), 184–197 (2016).

[Crossref]
[PubMed]

R. Zhang, H. Guo, and A. K. Asundi, “Geometric analysis of influence of fringe directions on phase sensitivities in fringe projection profilometry,” Appl. Opt. 55(27), 7675–7687 (2016).

[Crossref]
[PubMed]

C. Zuo, L. Huang, M. Zhang, Q. Chen, and A. Asundi, “Temporal phase unwrapping algorithms for fringe projection profilometry: A comparative review,” Opt. Lasers Eng. 85, 84–103 (2016).

[Crossref]

C. Zhang, H. Zhao, L. Zhang, and X. Wang, “Full-field phase error detection and compensation method for digital phase-shifting fringe projection profilometry,” Meas. Sci. Technol. 26(3), 035201 (2015).

[Crossref]

X. Ye, H.-B. Cheng, H.-Y. Wu, D.-M. Zhou, and H.-Y. Tam, “Gamma correction for three-dimensional object measurement by phase measuring profilometry,” Optik (Stuttg.) 126(24), 5534–5538 (2015).

[Crossref]

K. Liu, S. Wang, D. L. Lau, K. E. Barner, and F. Kiamilev, “Nonlinearity calibrating algorithm for structured light illumination,” Opt. Eng. 53(5), 050501 (2014).

[Crossref]

Y. Fu, Z. Wang, G. Jiang, and J. Yang, “A novel three-dimensional shape measurement method based on a look-up table,” Optik (Stuttg.) 125(6), 1804–1808 (2014).

[Crossref]

B. Li, Y. Wang, J. Dai, W. Lohry, and S. Zhang, “Some recent advances on superfast 3D shape measurement with digital binary defocusing techniques,” Opt. Lasers Eng. 54, 236–246 (2014).

[Crossref]

Y. Xiao, Y. Cao, Y. Wu, and S. Shi, “Single orthogonal sinusoidal grating for gamma correction in digital projection phase measuring profilometry,” Opt. Eng. 52(5), 053605 (2013).

[Crossref]

Y. Fu, Y. Wang, W. Wang, and J. Wu, “Least-squares calibration method for fringe projection profilometry with some practical considerations,” Optik (Stuttg.) 124(19), 4041–4045 (2013).

[Crossref]

D. Zheng and F. Da, “Gamma correction for two step phase shifting fringe projection profilometry,” Optik (Stuttg.) 124(13), 1392–1397 (2013).

[Crossref]

S. Ma, C. Quan, R. Zhu, L. Chen, B. Li, and C. J. Tay, “A fast and accurate gamma correction based on Fourier spectrum analysis for digital fringe projection profilometry,” Opt. Commun. 285(5), 533–538 (2012).

[Crossref]

M. Dai, F. Yang, and X. He, “Single-shot color fringe projection for three-dimensional shape measurement of objects with discontinuities,” Appl. Opt. 51(12), 2062–2069 (2012).

[Crossref]
[PubMed]

X. Zhang, L. Zhu, Y. Li, and D. Tu, “Generic nonsinusoidal fringe model and gamma calibration in phase measuring profilometry,” J. Opt. Soc. Am. A 29(6), 1047–1058 (2012).

[Crossref]
[PubMed]

H. Guo and B. Lü, “Phase-shifting algorithm by use of Hough transform,” Opt. Express 20(23), 26037–26049 (2012).

[Crossref]
[PubMed]

S. Gai and F. Da, “A novel fringe adaptation method for digital projector,” Opt. Lasers Eng. 49(4), 547–552 (2011).

[Crossref]

S. S. Gorthi and P. Rostogi, “Fringe projection techniques: whither we are?” Opt. Lasers Eng. 48(2), 133–140 (2010).

[Crossref]

S. Zhang, “Recent progresses on real-time 3d shape measurement using digital fringe projection techniques,” Opt. Lasers Eng. 48(2), 149–158 (2010).

[Crossref]

T. Hoang, B. Pan, D. Nguyen, and Z. Wang, “Generic gamma correction for accuracy enhancement in fringe-projection profilometry,” Opt. Lett. 35(12), 1992–1994 (2010).

[Crossref]
[PubMed]

H. Guo, P. Feng, and T. Tao, “Specular surface measurement by using least squares light tracking technique,” Opt. Lasers Eng. 48(2), 166–171 (2010).

[Crossref]

Z.-W. Li, Y.-S. Shi, C.-J. Wang, D.-H. Qin, and K. Huang, “Complex object 3D measurement based on phase-shifting and a neural network,” Opt. Commun. 282(14), 2699–2706 (2009).

[Crossref]

B. Pan, Q. Kemao, L. Huang, and A. Asundi, “Phase error analysis and compensation for nonsinusoidal waveforms in phase-shifting digital fringe projection profilometry,” Opt. Lett. 34(4), 416–418 (2009).

[Crossref]
[PubMed]

Z. Li, Y. Shi, and C. Wang, “Accurate calibration method for a structured light system,” Opt. Eng. 47(5), 053604 (2008).

[Crossref]

H. Guo, H. He, Y. Yu, and M. Chen, “Least-squares calibration method for fringe projection profilometry,” Opt. Eng. 44(3), 033603 (2005).

[Crossref]

S. Zhang and P. S. Huang, “Phase error compensation for a 3-D shape measurement system based on the phase-shifting method,” Proc. SPIE 6000, 133–142 (2005).

[Crossref]

H. Guo and M. Chen, “Fourier analysis of the sampling characteristics of the phase-shifting algorithm,” Proc. SPIE 5180, 437–444 (2003).

[Crossref]

C. Zuo, L. Huang, M. Zhang, Q. Chen, and A. Asundi, “Temporal phase unwrapping algorithms for fringe projection profilometry: A comparative review,” Opt. Lasers Eng. 85, 84–103 (2016).

[Crossref]

B. Pan, Q. Kemao, L. Huang, and A. Asundi, “Phase error analysis and compensation for nonsinusoidal waveforms in phase-shifting digital fringe projection profilometry,” Opt. Lett. 34(4), 416–418 (2009).

[Crossref]
[PubMed]

K. Liu, S. Wang, D. L. Lau, K. E. Barner, and F. Kiamilev, “Nonlinearity calibrating algorithm for structured light illumination,” Opt. Eng. 53(5), 050501 (2014).

[Crossref]

Z. Wang, D. Nguyen, and J. Barnes, “Recent advances in 3D shape measurement and imaging using fringe projection technique,” in Proceedings of the SEM Annual Congress and Exposition on Experimental and Applied Mechanics 2009 (Society for Experimental Mechanics, 2009), pp. 2644–2653.

Y. Xiao, Y. Cao, Y. Wu, and S. Shi, “Single orthogonal sinusoidal grating for gamma correction in digital projection phase measuring profilometry,” Opt. Eng. 52(5), 053605 (2013).

[Crossref]

S. Ma, C. Quan, R. Zhu, L. Chen, B. Li, and C. J. Tay, “A fast and accurate gamma correction based on Fourier spectrum analysis for digital fringe projection profilometry,” Opt. Commun. 285(5), 533–538 (2012).

[Crossref]

H. Guo, M. Chen, and P. Zheng, “Least-squares fitting of carrier phase distribution by using a rational function in fringe projection profilometry,” Opt. Lett. 31(24), 3588–3590 (2006).

[Crossref]
[PubMed]

H. Guo, H. He, Y. Yu, and M. Chen, “Least-squares calibration method for fringe projection profilometry,” Opt. Eng. 44(3), 033603 (2005).

[Crossref]

H. Guo, H. He, and M. Chen, “Gamma correction for digital fringe projection profilometry,” Appl. Opt. 43(14), 2906–2914 (2004).

[Crossref]
[PubMed]

H. Guo and M. Chen, “Fourier analysis of the sampling characteristics of the phase-shifting algorithm,” Proc. SPIE 5180, 437–444 (2003).

[Crossref]

C. Zuo, L. Huang, M. Zhang, Q. Chen, and A. Asundi, “Temporal phase unwrapping algorithms for fringe projection profilometry: A comparative review,” Opt. Lasers Eng. 85, 84–103 (2016).

[Crossref]

X. Ye, H.-B. Cheng, H.-Y. Wu, D.-M. Zhou, and H.-Y. Tam, “Gamma correction for three-dimensional object measurement by phase measuring profilometry,” Optik (Stuttg.) 126(24), 5534–5538 (2015).

[Crossref]

D. Zheng and F. Da, “Gamma correction for two step phase shifting fringe projection profilometry,” Optik (Stuttg.) 124(13), 1392–1397 (2013).

[Crossref]

S. Gai and F. Da, “A novel fringe adaptation method for digital projector,” Opt. Lasers Eng. 49(4), 547–552 (2011).

[Crossref]

B. Li, Y. Wang, J. Dai, W. Lohry, and S. Zhang, “Some recent advances on superfast 3D shape measurement with digital binary defocusing techniques,” Opt. Lasers Eng. 54, 236–246 (2014).

[Crossref]

H. Guo, P. Feng, and T. Tao, “Specular surface measurement by using least squares light tracking technique,” Opt. Lasers Eng. 48(2), 166–171 (2010).

[Crossref]

Y. Fu, Z. Wang, G. Jiang, and J. Yang, “A novel three-dimensional shape measurement method based on a look-up table,” Optik (Stuttg.) 125(6), 1804–1808 (2014).

[Crossref]

Y. Fu, Y. Wang, W. Wang, and J. Wu, “Least-squares calibration method for fringe projection profilometry with some practical considerations,” Optik (Stuttg.) 124(19), 4041–4045 (2013).

[Crossref]

S. Gai and F. Da, “A novel fringe adaptation method for digital projector,” Opt. Lasers Eng. 49(4), 547–552 (2011).

[Crossref]

S. S. Gorthi and P. Rostogi, “Fringe projection techniques: whither we are?” Opt. Lasers Eng. 48(2), 133–140 (2010).

[Crossref]

S. Xing and H. Guo, “Temporal phase unwrapping for fringe projection profilometry aided by recursion of Chebyshev polynomials,” Appl. Opt. 56(6), 1591–1602 (2017).

[Crossref]
[PubMed]

F. Lü, S. Xing, and H. Guo, “Self-correction of projector nonlinearity in phase-shifting fringe projection profilometry,” Appl. Opt. 56(25), 7204–7216 (2017).

[Crossref]
[PubMed]

R. Zhang and H. Guo, “Depth recovering method immune to projector errors in fringe projection profilometry by use of cross-ratio invariance,” Opt. Express 25(23), 29272–29286 (2017).

[Crossref]

Y. Lu, R. Zhang, and H. Guo, “Correction of illumination fluctuations in phase-shifting technique by use of fringe histograms,” Appl. Opt. 55(1), 184–197 (2016).

[Crossref]
[PubMed]

R. Zhang, H. Guo, and A. K. Asundi, “Geometric analysis of influence of fringe directions on phase sensitivities in fringe projection profilometry,” Appl. Opt. 55(27), 7675–7687 (2016).

[Crossref]
[PubMed]

H. Guo and B. Lü, “Phase-shifting algorithm by use of Hough transform,” Opt. Express 20(23), 26037–26049 (2012).

[Crossref]
[PubMed]

H. Guo, P. Feng, and T. Tao, “Specular surface measurement by using least squares light tracking technique,” Opt. Lasers Eng. 48(2), 166–171 (2010).

[Crossref]

H. Guo and Z. Zhao, “Nonlinearity correction in digital fringe projection profilometry by using histogram matching technique,” Proc. SPIE 6616, 66162I (2007).

[Crossref]

H. Guo, M. Chen, and P. Zheng, “Least-squares fitting of carrier phase distribution by using a rational function in fringe projection profilometry,” Opt. Lett. 31(24), 3588–3590 (2006).

[Crossref]
[PubMed]

H. Guo, H. He, Y. Yu, and M. Chen, “Least-squares calibration method for fringe projection profilometry,” Opt. Eng. 44(3), 033603 (2005).

[Crossref]

H. Guo, H. He, and M. Chen, “Gamma correction for digital fringe projection profilometry,” Appl. Opt. 43(14), 2906–2914 (2004).

[Crossref]
[PubMed]

H. Guo and M. Chen, “Fourier analysis of the sampling characteristics of the phase-shifting algorithm,” Proc. SPIE 5180, 437–444 (2003).

[Crossref]

H. Guo, H. He, Y. Yu, and M. Chen, “Least-squares calibration method for fringe projection profilometry,” Opt. Eng. 44(3), 033603 (2005).

[Crossref]

H. Guo, H. He, and M. Chen, “Gamma correction for digital fringe projection profilometry,” Appl. Opt. 43(14), 2906–2914 (2004).

[Crossref]
[PubMed]

Z.-W. Li, Y.-S. Shi, C.-J. Wang, D.-H. Qin, and K. Huang, “Complex object 3D measurement based on phase-shifting and a neural network,” Opt. Commun. 282(14), 2699–2706 (2009).

[Crossref]

C. Zuo, L. Huang, M. Zhang, Q. Chen, and A. Asundi, “Temporal phase unwrapping algorithms for fringe projection profilometry: A comparative review,” Opt. Lasers Eng. 85, 84–103 (2016).

[Crossref]

B. Pan, Q. Kemao, L. Huang, and A. Asundi, “Phase error analysis and compensation for nonsinusoidal waveforms in phase-shifting digital fringe projection profilometry,” Opt. Lett. 34(4), 416–418 (2009).

[Crossref]
[PubMed]

S. Zhang and P. S. Huang, “Phase error compensation for a 3-D shape measurement system based on the phase-shifting method,” Proc. SPIE 6000, 133–142 (2005).

[Crossref]

Y. Fu, Z. Wang, G. Jiang, and J. Yang, “A novel three-dimensional shape measurement method based on a look-up table,” Optik (Stuttg.) 125(6), 1804–1808 (2014).

[Crossref]

K. Liu, S. Wang, D. L. Lau, K. E. Barner, and F. Kiamilev, “Nonlinearity calibrating algorithm for structured light illumination,” Opt. Eng. 53(5), 050501 (2014).

[Crossref]

K. Liu, S. Wang, D. L. Lau, K. E. Barner, and F. Kiamilev, “Nonlinearity calibrating algorithm for structured light illumination,” Opt. Eng. 53(5), 050501 (2014).

[Crossref]

B. Li, Y. Wang, J. Dai, W. Lohry, and S. Zhang, “Some recent advances on superfast 3D shape measurement with digital binary defocusing techniques,” Opt. Lasers Eng. 54, 236–246 (2014).

[Crossref]

S. Ma, C. Quan, R. Zhu, L. Chen, B. Li, and C. J. Tay, “A fast and accurate gamma correction based on Fourier spectrum analysis for digital fringe projection profilometry,” Opt. Commun. 285(5), 533–538 (2012).

[Crossref]

Z. Li, Y. Shi, and C. Wang, “Accurate calibration method for a structured light system,” Opt. Eng. 47(5), 053604 (2008).

[Crossref]

Z.-W. Li, Y.-S. Shi, C.-J. Wang, D.-H. Qin, and K. Huang, “Complex object 3D measurement based on phase-shifting and a neural network,” Opt. Commun. 282(14), 2699–2706 (2009).

[Crossref]

K. Liu, S. Wang, D. L. Lau, K. E. Barner, and F. Kiamilev, “Nonlinearity calibrating algorithm for structured light illumination,” Opt. Eng. 53(5), 050501 (2014).

[Crossref]

B. Li, Y. Wang, J. Dai, W. Lohry, and S. Zhang, “Some recent advances on superfast 3D shape measurement with digital binary defocusing techniques,” Opt. Lasers Eng. 54, 236–246 (2014).

[Crossref]

S. Ma, C. Quan, R. Zhu, L. Chen, B. Li, and C. J. Tay, “A fast and accurate gamma correction based on Fourier spectrum analysis for digital fringe projection profilometry,” Opt. Commun. 285(5), 533–538 (2012).

[Crossref]

T. Hoang, B. Pan, D. Nguyen, and Z. Wang, “Generic gamma correction for accuracy enhancement in fringe-projection profilometry,” Opt. Lett. 35(12), 1992–1994 (2010).

[Crossref]
[PubMed]

Z. Wang, D. Nguyen, and J. Barnes, “Recent advances in 3D shape measurement and imaging using fringe projection technique,” in Proceedings of the SEM Annual Congress and Exposition on Experimental and Applied Mechanics 2009 (Society for Experimental Mechanics, 2009), pp. 2644–2653.

T. Hoang, B. Pan, D. Nguyen, and Z. Wang, “Generic gamma correction for accuracy enhancement in fringe-projection profilometry,” Opt. Lett. 35(12), 1992–1994 (2010).

[Crossref]
[PubMed]

B. Pan, Q. Kemao, L. Huang, and A. Asundi, “Phase error analysis and compensation for nonsinusoidal waveforms in phase-shifting digital fringe projection profilometry,” Opt. Lett. 34(4), 416–418 (2009).

[Crossref]
[PubMed]

Z.-W. Li, Y.-S. Shi, C.-J. Wang, D.-H. Qin, and K. Huang, “Complex object 3D measurement based on phase-shifting and a neural network,” Opt. Commun. 282(14), 2699–2706 (2009).

[Crossref]

S. Ma, C. Quan, R. Zhu, L. Chen, B. Li, and C. J. Tay, “A fast and accurate gamma correction based on Fourier spectrum analysis for digital fringe projection profilometry,” Opt. Commun. 285(5), 533–538 (2012).

[Crossref]

S. S. Gorthi and P. Rostogi, “Fringe projection techniques: whither we are?” Opt. Lasers Eng. 48(2), 133–140 (2010).

[Crossref]

Y. Xiao, Y. Cao, Y. Wu, and S. Shi, “Single orthogonal sinusoidal grating for gamma correction in digital projection phase measuring profilometry,” Opt. Eng. 52(5), 053605 (2013).

[Crossref]

Z. Li, Y. Shi, and C. Wang, “Accurate calibration method for a structured light system,” Opt. Eng. 47(5), 053604 (2008).

[Crossref]

Z.-W. Li, Y.-S. Shi, C.-J. Wang, D.-H. Qin, and K. Huang, “Complex object 3D measurement based on phase-shifting and a neural network,” Opt. Commun. 282(14), 2699–2706 (2009).

[Crossref]

X. Ye, H.-B. Cheng, H.-Y. Wu, D.-M. Zhou, and H.-Y. Tam, “Gamma correction for three-dimensional object measurement by phase measuring profilometry,” Optik (Stuttg.) 126(24), 5534–5538 (2015).

[Crossref]

H. Guo, P. Feng, and T. Tao, “Specular surface measurement by using least squares light tracking technique,” Opt. Lasers Eng. 48(2), 166–171 (2010).

[Crossref]

S. Ma, C. Quan, R. Zhu, L. Chen, B. Li, and C. J. Tay, “A fast and accurate gamma correction based on Fourier spectrum analysis for digital fringe projection profilometry,” Opt. Commun. 285(5), 533–538 (2012).

[Crossref]

Z. Li, Y. Shi, and C. Wang, “Accurate calibration method for a structured light system,” Opt. Eng. 47(5), 053604 (2008).

[Crossref]

Z.-W. Li, Y.-S. Shi, C.-J. Wang, D.-H. Qin, and K. Huang, “Complex object 3D measurement based on phase-shifting and a neural network,” Opt. Commun. 282(14), 2699–2706 (2009).

[Crossref]

K. Liu, S. Wang, D. L. Lau, K. E. Barner, and F. Kiamilev, “Nonlinearity calibrating algorithm for structured light illumination,” Opt. Eng. 53(5), 050501 (2014).

[Crossref]

Y. Fu, Y. Wang, W. Wang, and J. Wu, “Least-squares calibration method for fringe projection profilometry with some practical considerations,” Optik (Stuttg.) 124(19), 4041–4045 (2013).

[Crossref]

C. Zhang, H. Zhao, L. Zhang, and X. Wang, “Full-field phase error detection and compensation method for digital phase-shifting fringe projection profilometry,” Meas. Sci. Technol. 26(3), 035201 (2015).

[Crossref]

B. Li, Y. Wang, J. Dai, W. Lohry, and S. Zhang, “Some recent advances on superfast 3D shape measurement with digital binary defocusing techniques,” Opt. Lasers Eng. 54, 236–246 (2014).

[Crossref]

Y. Fu, Y. Wang, W. Wang, and J. Wu, “Least-squares calibration method for fringe projection profilometry with some practical considerations,” Optik (Stuttg.) 124(19), 4041–4045 (2013).

[Crossref]

Y. Fu, Z. Wang, G. Jiang, and J. Yang, “A novel three-dimensional shape measurement method based on a look-up table,” Optik (Stuttg.) 125(6), 1804–1808 (2014).

[Crossref]

T. Hoang, B. Pan, D. Nguyen, and Z. Wang, “Generic gamma correction for accuracy enhancement in fringe-projection profilometry,” Opt. Lett. 35(12), 1992–1994 (2010).

[Crossref]
[PubMed]

Z. Wang, D. Nguyen, and J. Barnes, “Recent advances in 3D shape measurement and imaging using fringe projection technique,” in Proceedings of the SEM Annual Congress and Exposition on Experimental and Applied Mechanics 2009 (Society for Experimental Mechanics, 2009), pp. 2644–2653.

X. Ye, H.-B. Cheng, H.-Y. Wu, D.-M. Zhou, and H.-Y. Tam, “Gamma correction for three-dimensional object measurement by phase measuring profilometry,” Optik (Stuttg.) 126(24), 5534–5538 (2015).

[Crossref]

Y. Fu, Y. Wang, W. Wang, and J. Wu, “Least-squares calibration method for fringe projection profilometry with some practical considerations,” Optik (Stuttg.) 124(19), 4041–4045 (2013).

[Crossref]

Y. Xiao, Y. Cao, Y. Wu, and S. Shi, “Single orthogonal sinusoidal grating for gamma correction in digital projection phase measuring profilometry,” Opt. Eng. 52(5), 053605 (2013).

[Crossref]

Y. Xiao, Y. Cao, Y. Wu, and S. Shi, “Single orthogonal sinusoidal grating for gamma correction in digital projection phase measuring profilometry,” Opt. Eng. 52(5), 053605 (2013).

[Crossref]

Y. Fu, Z. Wang, G. Jiang, and J. Yang, “A novel three-dimensional shape measurement method based on a look-up table,” Optik (Stuttg.) 125(6), 1804–1808 (2014).

[Crossref]

X. Ye, H.-B. Cheng, H.-Y. Wu, D.-M. Zhou, and H.-Y. Tam, “Gamma correction for three-dimensional object measurement by phase measuring profilometry,” Optik (Stuttg.) 126(24), 5534–5538 (2015).

[Crossref]

H. Guo, H. He, Y. Yu, and M. Chen, “Least-squares calibration method for fringe projection profilometry,” Opt. Eng. 44(3), 033603 (2005).

[Crossref]

C. Zhang, H. Zhao, L. Zhang, and X. Wang, “Full-field phase error detection and compensation method for digital phase-shifting fringe projection profilometry,” Meas. Sci. Technol. 26(3), 035201 (2015).

[Crossref]

C. Zhang, H. Zhao, L. Zhang, and X. Wang, “Full-field phase error detection and compensation method for digital phase-shifting fringe projection profilometry,” Meas. Sci. Technol. 26(3), 035201 (2015).

[Crossref]

C. Zuo, L. Huang, M. Zhang, Q. Chen, and A. Asundi, “Temporal phase unwrapping algorithms for fringe projection profilometry: A comparative review,” Opt. Lasers Eng. 85, 84–103 (2016).

[Crossref]

R. Zhang and H. Guo, “Depth recovering method immune to projector errors in fringe projection profilometry by use of cross-ratio invariance,” Opt. Express 25(23), 29272–29286 (2017).

[Crossref]

R. Zhang, H. Guo, and A. K. Asundi, “Geometric analysis of influence of fringe directions on phase sensitivities in fringe projection profilometry,” Appl. Opt. 55(27), 7675–7687 (2016).

[Crossref]
[PubMed]

Y. Lu, R. Zhang, and H. Guo, “Correction of illumination fluctuations in phase-shifting technique by use of fringe histograms,” Appl. Opt. 55(1), 184–197 (2016).

[Crossref]
[PubMed]

B. Li, Y. Wang, J. Dai, W. Lohry, and S. Zhang, “Some recent advances on superfast 3D shape measurement with digital binary defocusing techniques,” Opt. Lasers Eng. 54, 236–246 (2014).

[Crossref]

S. Zhang, “Recent progresses on real-time 3d shape measurement using digital fringe projection techniques,” Opt. Lasers Eng. 48(2), 149–158 (2010).

[Crossref]

S. Zhang and S.-T. Yau, “Generic nonsinusoidal phase error correction for three-dimensional shape measurement using a digital video projector,” Appl. Opt. 46(1), 36–43 (2007).

[Crossref]
[PubMed]

S. Zhang and P. S. Huang, “Phase error compensation for a 3-D shape measurement system based on the phase-shifting method,” Proc. SPIE 6000, 133–142 (2005).

[Crossref]

C. Zhang, H. Zhao, L. Zhang, and X. Wang, “Full-field phase error detection and compensation method for digital phase-shifting fringe projection profilometry,” Meas. Sci. Technol. 26(3), 035201 (2015).

[Crossref]

H. Guo and Z. Zhao, “Nonlinearity correction in digital fringe projection profilometry by using histogram matching technique,” Proc. SPIE 6616, 66162I (2007).

[Crossref]

D. Zheng and F. Da, “Gamma correction for two step phase shifting fringe projection profilometry,” Optik (Stuttg.) 124(13), 1392–1397 (2013).

[Crossref]

X. Ye, H.-B. Cheng, H.-Y. Wu, D.-M. Zhou, and H.-Y. Tam, “Gamma correction for three-dimensional object measurement by phase measuring profilometry,” Optik (Stuttg.) 126(24), 5534–5538 (2015).

[Crossref]

S. Ma, C. Quan, R. Zhu, L. Chen, B. Li, and C. J. Tay, “A fast and accurate gamma correction based on Fourier spectrum analysis for digital fringe projection profilometry,” Opt. Commun. 285(5), 533–538 (2012).

[Crossref]

C. Zuo, L. Huang, M. Zhang, Q. Chen, and A. Asundi, “Temporal phase unwrapping algorithms for fringe projection profilometry: A comparative review,” Opt. Lasers Eng. 85, 84–103 (2016).

[Crossref]

V. Srinivasan, H. C. Liu, and M. Halioua, “Automated phase-measuring profilometry of 3-D diffuse objects,” Appl. Opt. 23(18), 3105–3108 (1984).

[Crossref]
[PubMed]

M. Dai, F. Yang, and X. He, “Single-shot color fringe projection for three-dimensional shape measurement of objects with discontinuities,” Appl. Opt. 51(12), 2062–2069 (2012).

[Crossref]
[PubMed]

S. Zhang and S.-T. Yau, “Generic nonsinusoidal phase error correction for three-dimensional shape measurement using a digital video projector,” Appl. Opt. 46(1), 36–43 (2007).

[Crossref]
[PubMed]

H. Guo, H. He, and M. Chen, “Gamma correction for digital fringe projection profilometry,” Appl. Opt. 43(14), 2906–2914 (2004).

[Crossref]
[PubMed]

F. Lü, S. Xing, and H. Guo, “Self-correction of projector nonlinearity in phase-shifting fringe projection profilometry,” Appl. Opt. 56(25), 7204–7216 (2017).

[Crossref]
[PubMed]

J. H. Bruning, D. R. Herriott, J. E. Gallagher, D. P. Rosenfeld, A. D. White, and D. J. Brangaccio, “Digital wavefront measuring interferometer for testing optical surfaces and lenses,” Appl. Opt. 13(11), 2693–2703 (1974).

[Crossref]
[PubMed]

S. Xing and H. Guo, “Temporal phase unwrapping for fringe projection profilometry aided by recursion of Chebyshev polynomials,” Appl. Opt. 56(6), 1591–1602 (2017).

[Crossref]
[PubMed]

Y. Lu, R. Zhang, and H. Guo, “Correction of illumination fluctuations in phase-shifting technique by use of fringe histograms,” Appl. Opt. 55(1), 184–197 (2016).

[Crossref]
[PubMed]

R. Zhang, H. Guo, and A. K. Asundi, “Geometric analysis of influence of fringe directions on phase sensitivities in fringe projection profilometry,” Appl. Opt. 55(27), 7675–7687 (2016).

[Crossref]
[PubMed]

C. Zhang, H. Zhao, L. Zhang, and X. Wang, “Full-field phase error detection and compensation method for digital phase-shifting fringe projection profilometry,” Meas. Sci. Technol. 26(3), 035201 (2015).

[Crossref]

S. Ma, C. Quan, R. Zhu, L. Chen, B. Li, and C. J. Tay, “A fast and accurate gamma correction based on Fourier spectrum analysis for digital fringe projection profilometry,” Opt. Commun. 285(5), 533–538 (2012).

[Crossref]

Z.-W. Li, Y.-S. Shi, C.-J. Wang, D.-H. Qin, and K. Huang, “Complex object 3D measurement based on phase-shifting and a neural network,” Opt. Commun. 282(14), 2699–2706 (2009).

[Crossref]

K. Liu, S. Wang, D. L. Lau, K. E. Barner, and F. Kiamilev, “Nonlinearity calibrating algorithm for structured light illumination,” Opt. Eng. 53(5), 050501 (2014).

[Crossref]

Z. Li, Y. Shi, and C. Wang, “Accurate calibration method for a structured light system,” Opt. Eng. 47(5), 053604 (2008).

[Crossref]

Y. Xiao, Y. Cao, Y. Wu, and S. Shi, “Single orthogonal sinusoidal grating for gamma correction in digital projection phase measuring profilometry,” Opt. Eng. 52(5), 053605 (2013).

[Crossref]

H. Guo, H. He, Y. Yu, and M. Chen, “Least-squares calibration method for fringe projection profilometry,” Opt. Eng. 44(3), 033603 (2005).

[Crossref]

H. Guo, P. Feng, and T. Tao, “Specular surface measurement by using least squares light tracking technique,” Opt. Lasers Eng. 48(2), 166–171 (2010).

[Crossref]

B. Li, Y. Wang, J. Dai, W. Lohry, and S. Zhang, “Some recent advances on superfast 3D shape measurement with digital binary defocusing techniques,” Opt. Lasers Eng. 54, 236–246 (2014).

[Crossref]

S. Zhang, “Recent progresses on real-time 3d shape measurement using digital fringe projection techniques,” Opt. Lasers Eng. 48(2), 149–158 (2010).

[Crossref]

S. Gai and F. Da, “A novel fringe adaptation method for digital projector,” Opt. Lasers Eng. 49(4), 547–552 (2011).

[Crossref]

C. Zuo, L. Huang, M. Zhang, Q. Chen, and A. Asundi, “Temporal phase unwrapping algorithms for fringe projection profilometry: A comparative review,” Opt. Lasers Eng. 85, 84–103 (2016).

[Crossref]

S. S. Gorthi and P. Rostogi, “Fringe projection techniques: whither we are?” Opt. Lasers Eng. 48(2), 133–140 (2010).

[Crossref]

T. Hoang, B. Pan, D. Nguyen, and Z. Wang, “Generic gamma correction for accuracy enhancement in fringe-projection profilometry,” Opt. Lett. 35(12), 1992–1994 (2010).

[Crossref]
[PubMed]

H. Guo, M. Chen, and P. Zheng, “Least-squares fitting of carrier phase distribution by using a rational function in fringe projection profilometry,” Opt. Lett. 31(24), 3588–3590 (2006).

[Crossref]
[PubMed]

B. Pan, Q. Kemao, L. Huang, and A. Asundi, “Phase error analysis and compensation for nonsinusoidal waveforms in phase-shifting digital fringe projection profilometry,” Opt. Lett. 34(4), 416–418 (2009).

[Crossref]
[PubMed]

X. Ye, H.-B. Cheng, H.-Y. Wu, D.-M. Zhou, and H.-Y. Tam, “Gamma correction for three-dimensional object measurement by phase measuring profilometry,” Optik (Stuttg.) 126(24), 5534–5538 (2015).

[Crossref]

Y. Fu, Z. Wang, G. Jiang, and J. Yang, “A novel three-dimensional shape measurement method based on a look-up table,” Optik (Stuttg.) 125(6), 1804–1808 (2014).

[Crossref]

Y. Fu, Y. Wang, W. Wang, and J. Wu, “Least-squares calibration method for fringe projection profilometry with some practical considerations,” Optik (Stuttg.) 124(19), 4041–4045 (2013).

[Crossref]

D. Zheng and F. Da, “Gamma correction for two step phase shifting fringe projection profilometry,” Optik (Stuttg.) 124(13), 1392–1397 (2013).

[Crossref]

S. Zhang and P. S. Huang, “Phase error compensation for a 3-D shape measurement system based on the phase-shifting method,” Proc. SPIE 6000, 133–142 (2005).

[Crossref]

H. Guo and M. Chen, “Fourier analysis of the sampling characteristics of the phase-shifting algorithm,” Proc. SPIE 5180, 437–444 (2003).

[Crossref]

H. Guo and Z. Zhao, “Nonlinearity correction in digital fringe projection profilometry by using histogram matching technique,” Proc. SPIE 6616, 66162I (2007).

[Crossref]

X. Colonna De Lega and P. de Groot, “Lateral resolution and instrument transfer function as criteria for selecting surface metrology instruments,” in Imaging and Applied Optics Technical Papers, OSA Technical Digest (online) (Optical Society of America, 2012), paper OTu1D.4.

Z. Wang, D. Nguyen, and J. Barnes, “Recent advances in 3D shape measurement and imaging using fringe projection technique,” in Proceedings of the SEM Annual Congress and Exposition on Experimental and Applied Mechanics 2009 (Society for Experimental Mechanics, 2009), pp. 2644–2653.