A. Głowacz and Z. Głowacz, “Diagnosis of the three-phase induction motor using thermal imaging,” Infrared Phys. Technol. 81, 7–16 (2017).

Y. An and S. Zhang, “Three-dimensional absolute shape measurement by combining binary statistical pattern matching with phase-shifting methods,” Appl. Opt. 56(19), 5418–5426 (2017).

[PubMed]

B. Özgürün, D. Ö. Tayyar, K. Ö. Agiş, and M. Özcan, “Three-dimensional image reconstruction of macroscopic objects from a single digital hologram using stereo disparity,” Appl. Opt. 56(13), F84–F90 (2017).

[PubMed]

W. Li, S. Shan, and H. Liu, “High-precision method of binocular camera calibration with a distortion model,” Appl. Opt. 56(8), 2368–2377 (2017).

[PubMed]

G. Xu, J. Yuan, X. Li, and J. Su, “3D reconstruction of laser projective point with projection invariant generated from five points on 2D target,” Sci. Rep. 7(1), 7049 (2017).

[PubMed]

G. Xu, X. Zhang, J. Su, X. Li, and A. Zheng, “Solution approach of a laser plane based on Plücker matrices of the projective lines on a flexible 2D target,” Appl. Opt. 55(10), 2653–2656 (2016).

[PubMed]

A. Glowacz and Z. Glowacz, “Diagnostics of stator faults of the single-phase induction motor using thermal images, moasos and selected classifiers,” Measurement 93, 86–93 (2016).

H. Zhang, K. Iijima, J. Huang, G. P. Walcott, and J. M. Rogers, “Optical mapping of membrane potential and epicardial deformation in beating hearts,” Biophys. J. 111(2), 438–451 (2016).

[PubMed]

C. Wei, C. Sihai, L. Dong, and J. Guohua, “A compact two-dimensional laser scanner based on piezoelectric actuators,” Rev. Sci. Instrum. 86(1), 013102 (2015).

[PubMed]

R. S. Lim, H. M. La, and W. Sheng, “A robotic crack inspection and mapping system for bridge deck maintenance,” IEEE Trans. Autom. Sci. Eng. 11(2), 367–378 (2014).

F. J. Brosed, J. Santolaria, J. J. Aguilar, and D. Guillomía, “Laser triangulation sensor and six axes anthropomorphic robot manipulator modelling for the measurement of complex geometry products,” Robot. Com.- Int. Manuf. 28(6), 660–671 (2012).

X. Cui, K. B. Lim, Q. Guo, and D. Wang, “Accurate geometrical optics model for single-lens stereovision system using a prism,” J. Opt. Soc. Am. A 29(9), 1828–1837 (2012).

[PubMed]

J. E. Ha, “Extrinsic calibration of a camera and laser range finder using a new calibration structure of a plane with a triangular hole,” Int. J. Control Autom. 10(6), 1240–1244 (2012).

J. Geng, “Structured-light 3D surface imaging: a tutorial,” Adv. Opt. Photonics 3(2), 128–160 (2011).

J. Santolaria, J. J. Aguilar, D. Guillomía, and C. Cajal, “A crenellated target-based calibration method for laser triangulation sensors integration in articulated measurement arms,” Robot. Com.- Int. Manuf. 27(2), 282–291 (2011).

C. H. Lee, Y. C. Lim, S. Kwon, and J. H. Lee, “Stereo vision-based vehicle detection using a road feature and disparity histogram,” Opt. Eng. 50(2), 027004 (2011).

J. Santolaria, J. J. Pastor, F. J. Brosed, and J. J. Aguilar, “A one-step intrinsic and extrinsic calibration method for laser line scanner operation in coordinate measuring machines,” Meas. Sci. Technol. 20(4), 045107 (2009).

S. Zhang and P. S. Huang, “Novel method for structured light system calibration,” Opt. Eng. 45(8), 083601 (2006).

M. Bleyer and M. Gelautz, “A layered stereo matching algorithm using image segmentation and global visibility constraints,” ISPRS J. Photogramm. 59(3), 128–150 (2005).

Z. Zhang, “Camera calibration with one-dimensional objects,” IEEE Trans. Pat. Anal. Mach. Intell. 26(7), 892–899 (2004).

[PubMed]

H. Hirschmüller, P. R. Innocent, and J. Garibaldi, “Real-time correlation-based stereo vision with reduced border errors,” Int. J. Comput. Vis. 47(1–3), 229–246 (2002).

C. L. Zitnick and T. Kanade, “A cooperative algorithm for stereo matching and occlusion detection,” IEEE Trans. Pat. Anal. 22(7), 675–684 (2000).

Z. Zhang, “A flexible new technique for camera calibration,” IEEE Trans. Pat. Anal. 22(11), 1330–1334 (2000).

J. Heikkila, “Geometric camera calibration using circular control points,” IEEE Trans. Pat. Anal. 22(10), 1066–1077 (2000).

C. Steger, “An unbiased detector of curvilinear structures,” IEEE Trans. Pat. Anal. 20(2), 113–125 (1998).

R. Tsai, “A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses,” IEEE Trans. Autom. Sci. Eng. 3(4), 323–344 (1987).

Y. I. Abdel-Aziz and H. M. Karara, “Direct linear transformation into object space coordinates in close-range photogrammetry,” in Proceedings of the Symposium on Close-Range Photogrammetry (Falls Church, VA, USA, 1971), pp. 1–18.

F. J. Brosed, J. Santolaria, J. J. Aguilar, and D. Guillomía, “Laser triangulation sensor and six axes anthropomorphic robot manipulator modelling for the measurement of complex geometry products,” Robot. Com.- Int. Manuf. 28(6), 660–671 (2012).

J. Santolaria, J. J. Aguilar, D. Guillomía, and C. Cajal, “A crenellated target-based calibration method for laser triangulation sensors integration in articulated measurement arms,” Robot. Com.- Int. Manuf. 27(2), 282–291 (2011).

J. Santolaria, J. J. Pastor, F. J. Brosed, and J. J. Aguilar, “A one-step intrinsic and extrinsic calibration method for laser line scanner operation in coordinate measuring machines,” Meas. Sci. Technol. 20(4), 045107 (2009).

M. Bleyer and M. Gelautz, “A layered stereo matching algorithm using image segmentation and global visibility constraints,” ISPRS J. Photogramm. 59(3), 128–150 (2005).

F. J. Brosed, J. Santolaria, J. J. Aguilar, and D. Guillomía, “Laser triangulation sensor and six axes anthropomorphic robot manipulator modelling for the measurement of complex geometry products,” Robot. Com.- Int. Manuf. 28(6), 660–671 (2012).

J. Santolaria, J. J. Pastor, F. J. Brosed, and J. J. Aguilar, “A one-step intrinsic and extrinsic calibration method for laser line scanner operation in coordinate measuring machines,” Meas. Sci. Technol. 20(4), 045107 (2009).

J. Santolaria, J. J. Aguilar, D. Guillomía, and C. Cajal, “A crenellated target-based calibration method for laser triangulation sensors integration in articulated measurement arms,” Robot. Com.- Int. Manuf. 27(2), 282–291 (2011).

C. Wei, C. Sihai, L. Dong, and J. Guohua, “A compact two-dimensional laser scanner based on piezoelectric actuators,” Rev. Sci. Instrum. 86(1), 013102 (2015).

[PubMed]

H. Hirschmüller, P. R. Innocent, and J. Garibaldi, “Real-time correlation-based stereo vision with reduced border errors,” Int. J. Comput. Vis. 47(1–3), 229–246 (2002).

M. Bleyer and M. Gelautz, “A layered stereo matching algorithm using image segmentation and global visibility constraints,” ISPRS J. Photogramm. 59(3), 128–150 (2005).

J. Geng, “Structured-light 3D surface imaging: a tutorial,” Adv. Opt. Photonics 3(2), 128–160 (2011).

A. Głowacz and Z. Głowacz, “Diagnosis of the three-phase induction motor using thermal imaging,” Infrared Phys. Technol. 81, 7–16 (2017).

A. Glowacz and Z. Glowacz, “Diagnostics of stator faults of the single-phase induction motor using thermal images, moasos and selected classifiers,” Measurement 93, 86–93 (2016).

A. Głowacz and Z. Głowacz, “Diagnosis of the three-phase induction motor using thermal imaging,” Infrared Phys. Technol. 81, 7–16 (2017).

A. Glowacz and Z. Glowacz, “Diagnostics of stator faults of the single-phase induction motor using thermal images, moasos and selected classifiers,” Measurement 93, 86–93 (2016).

F. J. Brosed, J. Santolaria, J. J. Aguilar, and D. Guillomía, “Laser triangulation sensor and six axes anthropomorphic robot manipulator modelling for the measurement of complex geometry products,” Robot. Com.- Int. Manuf. 28(6), 660–671 (2012).

J. Santolaria, J. J. Aguilar, D. Guillomía, and C. Cajal, “A crenellated target-based calibration method for laser triangulation sensors integration in articulated measurement arms,” Robot. Com.- Int. Manuf. 27(2), 282–291 (2011).

C. Wei, C. Sihai, L. Dong, and J. Guohua, “A compact two-dimensional laser scanner based on piezoelectric actuators,” Rev. Sci. Instrum. 86(1), 013102 (2015).

[PubMed]

J. E. Ha, “Extrinsic calibration of a camera and laser range finder using a new calibration structure of a plane with a triangular hole,” Int. J. Control Autom. 10(6), 1240–1244 (2012).

C. Harris and M. Stephens, “A combined corner and edge detector,” in Proceedings of the 4th Alvey Vision Conference (1988), pp. 147–151.

J. Heikkila, “Geometric camera calibration using circular control points,” IEEE Trans. Pat. Anal. 22(10), 1066–1077 (2000).

H. Hirschmüller, P. R. Innocent, and J. Garibaldi, “Real-time correlation-based stereo vision with reduced border errors,” Int. J. Comput. Vis. 47(1–3), 229–246 (2002).

H. Zhang, K. Iijima, J. Huang, G. P. Walcott, and J. M. Rogers, “Optical mapping of membrane potential and epicardial deformation in beating hearts,” Biophys. J. 111(2), 438–451 (2016).

[PubMed]

S. Zhang and P. S. Huang, “Novel method for structured light system calibration,” Opt. Eng. 45(8), 083601 (2006).

H. Zhang, K. Iijima, J. Huang, G. P. Walcott, and J. M. Rogers, “Optical mapping of membrane potential and epicardial deformation in beating hearts,” Biophys. J. 111(2), 438–451 (2016).

[PubMed]

H. Hirschmüller, P. R. Innocent, and J. Garibaldi, “Real-time correlation-based stereo vision with reduced border errors,” Int. J. Comput. Vis. 47(1–3), 229–246 (2002).

C. L. Zitnick and T. Kanade, “A cooperative algorithm for stereo matching and occlusion detection,” IEEE Trans. Pat. Anal. 22(7), 675–684 (2000).

Y. I. Abdel-Aziz and H. M. Karara, “Direct linear transformation into object space coordinates in close-range photogrammetry,” in Proceedings of the Symposium on Close-Range Photogrammetry (Falls Church, VA, USA, 1971), pp. 1–18.

C. H. Lee, Y. C. Lim, S. Kwon, and J. H. Lee, “Stereo vision-based vehicle detection using a road feature and disparity histogram,” Opt. Eng. 50(2), 027004 (2011).

R. S. Lim, H. M. La, and W. Sheng, “A robotic crack inspection and mapping system for bridge deck maintenance,” IEEE Trans. Autom. Sci. Eng. 11(2), 367–378 (2014).

C. H. Lee, Y. C. Lim, S. Kwon, and J. H. Lee, “Stereo vision-based vehicle detection using a road feature and disparity histogram,” Opt. Eng. 50(2), 027004 (2011).

C. H. Lee, Y. C. Lim, S. Kwon, and J. H. Lee, “Stereo vision-based vehicle detection using a road feature and disparity histogram,” Opt. Eng. 50(2), 027004 (2011).

G. Xu, J. Yuan, X. Li, and J. Su, “3D reconstruction of laser projective point with projection invariant generated from five points on 2D target,” Sci. Rep. 7(1), 7049 (2017).

[PubMed]

G. Xu, X. Zhang, J. Su, X. Li, and A. Zheng, “Solution approach of a laser plane based on Plücker matrices of the projective lines on a flexible 2D target,” Appl. Opt. 55(10), 2653–2656 (2016).

[PubMed]

R. S. Lim, H. M. La, and W. Sheng, “A robotic crack inspection and mapping system for bridge deck maintenance,” IEEE Trans. Autom. Sci. Eng. 11(2), 367–378 (2014).

C. H. Lee, Y. C. Lim, S. Kwon, and J. H. Lee, “Stereo vision-based vehicle detection using a road feature and disparity histogram,” Opt. Eng. 50(2), 027004 (2011).

J. Santolaria, J. J. Pastor, F. J. Brosed, and J. J. Aguilar, “A one-step intrinsic and extrinsic calibration method for laser line scanner operation in coordinate measuring machines,” Meas. Sci. Technol. 20(4), 045107 (2009).

H. Zhang, K. Iijima, J. Huang, G. P. Walcott, and J. M. Rogers, “Optical mapping of membrane potential and epicardial deformation in beating hearts,” Biophys. J. 111(2), 438–451 (2016).

[PubMed]

F. J. Brosed, J. Santolaria, J. J. Aguilar, and D. Guillomía, “Laser triangulation sensor and six axes anthropomorphic robot manipulator modelling for the measurement of complex geometry products,” Robot. Com.- Int. Manuf. 28(6), 660–671 (2012).

J. Santolaria, J. J. Aguilar, D. Guillomía, and C. Cajal, “A crenellated target-based calibration method for laser triangulation sensors integration in articulated measurement arms,” Robot. Com.- Int. Manuf. 27(2), 282–291 (2011).

J. Santolaria, J. J. Pastor, F. J. Brosed, and J. J. Aguilar, “A one-step intrinsic and extrinsic calibration method for laser line scanner operation in coordinate measuring machines,” Meas. Sci. Technol. 20(4), 045107 (2009).

R. S. Lim, H. M. La, and W. Sheng, “A robotic crack inspection and mapping system for bridge deck maintenance,” IEEE Trans. Autom. Sci. Eng. 11(2), 367–378 (2014).

C. Wei, C. Sihai, L. Dong, and J. Guohua, “A compact two-dimensional laser scanner based on piezoelectric actuators,” Rev. Sci. Instrum. 86(1), 013102 (2015).

[PubMed]

C. Steger, “An unbiased detector of curvilinear structures,” IEEE Trans. Pat. Anal. 20(2), 113–125 (1998).

C. Harris and M. Stephens, “A combined corner and edge detector,” in Proceedings of the 4th Alvey Vision Conference (1988), pp. 147–151.

G. Xu, J. Yuan, X. Li, and J. Su, “3D reconstruction of laser projective point with projection invariant generated from five points on 2D target,” Sci. Rep. 7(1), 7049 (2017).

[PubMed]

G. Xu, X. Zhang, J. Su, X. Li, and A. Zheng, “Solution approach of a laser plane based on Plücker matrices of the projective lines on a flexible 2D target,” Appl. Opt. 55(10), 2653–2656 (2016).

[PubMed]

R. Tsai, “A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses,” IEEE Trans. Autom. Sci. Eng. 3(4), 323–344 (1987).

H. Zhang, K. Iijima, J. Huang, G. P. Walcott, and J. M. Rogers, “Optical mapping of membrane potential and epicardial deformation in beating hearts,” Biophys. J. 111(2), 438–451 (2016).

[PubMed]

C. Wei, C. Sihai, L. Dong, and J. Guohua, “A compact two-dimensional laser scanner based on piezoelectric actuators,” Rev. Sci. Instrum. 86(1), 013102 (2015).

[PubMed]

G. Xu, J. Yuan, X. Li, and J. Su, “3D reconstruction of laser projective point with projection invariant generated from five points on 2D target,” Sci. Rep. 7(1), 7049 (2017).

[PubMed]

G. Xu, X. Zhang, J. Su, X. Li, and A. Zheng, “Solution approach of a laser plane based on Plücker matrices of the projective lines on a flexible 2D target,” Appl. Opt. 55(10), 2653–2656 (2016).

[PubMed]

G. Xu, J. Yuan, X. Li, and J. Su, “3D reconstruction of laser projective point with projection invariant generated from five points on 2D target,” Sci. Rep. 7(1), 7049 (2017).

[PubMed]

H. Zhang, K. Iijima, J. Huang, G. P. Walcott, and J. M. Rogers, “Optical mapping of membrane potential and epicardial deformation in beating hearts,” Biophys. J. 111(2), 438–451 (2016).

[PubMed]

Z. Zhang, “Camera calibration with one-dimensional objects,” IEEE Trans. Pat. Anal. Mach. Intell. 26(7), 892–899 (2004).

[PubMed]

Z. Zhang, “A flexible new technique for camera calibration,” IEEE Trans. Pat. Anal. 22(11), 1330–1334 (2000).

C. L. Zitnick and T. Kanade, “A cooperative algorithm for stereo matching and occlusion detection,” IEEE Trans. Pat. Anal. 22(7), 675–684 (2000).

J. Geng, “Structured-light 3D surface imaging: a tutorial,” Adv. Opt. Photonics 3(2), 128–160 (2011).

G. Xu, X. Zhang, J. Su, X. Li, and A. Zheng, “Solution approach of a laser plane based on Plücker matrices of the projective lines on a flexible 2D target,” Appl. Opt. 55(10), 2653–2656 (2016).

[PubMed]

W. Li, S. Shan, and H. Liu, “High-precision method of binocular camera calibration with a distortion model,” Appl. Opt. 56(8), 2368–2377 (2017).

[PubMed]

B. Özgürün, D. Ö. Tayyar, K. Ö. Agiş, and M. Özcan, “Three-dimensional image reconstruction of macroscopic objects from a single digital hologram using stereo disparity,” Appl. Opt. 56(13), F84–F90 (2017).

[PubMed]

Y. An and S. Zhang, “Three-dimensional absolute shape measurement by combining binary statistical pattern matching with phase-shifting methods,” Appl. Opt. 56(19), 5418–5426 (2017).

[PubMed]

H. Zhang, K. Iijima, J. Huang, G. P. Walcott, and J. M. Rogers, “Optical mapping of membrane potential and epicardial deformation in beating hearts,” Biophys. J. 111(2), 438–451 (2016).

[PubMed]

R. S. Lim, H. M. La, and W. Sheng, “A robotic crack inspection and mapping system for bridge deck maintenance,” IEEE Trans. Autom. Sci. Eng. 11(2), 367–378 (2014).

R. Tsai, “A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses,” IEEE Trans. Autom. Sci. Eng. 3(4), 323–344 (1987).

Z. Zhang, “A flexible new technique for camera calibration,” IEEE Trans. Pat. Anal. 22(11), 1330–1334 (2000).

C. L. Zitnick and T. Kanade, “A cooperative algorithm for stereo matching and occlusion detection,” IEEE Trans. Pat. Anal. 22(7), 675–684 (2000).

J. Heikkila, “Geometric camera calibration using circular control points,” IEEE Trans. Pat. Anal. 22(10), 1066–1077 (2000).

C. Steger, “An unbiased detector of curvilinear structures,” IEEE Trans. Pat. Anal. 20(2), 113–125 (1998).

Z. Zhang, “Camera calibration with one-dimensional objects,” IEEE Trans. Pat. Anal. Mach. Intell. 26(7), 892–899 (2004).

[PubMed]

A. Głowacz and Z. Głowacz, “Diagnosis of the three-phase induction motor using thermal imaging,” Infrared Phys. Technol. 81, 7–16 (2017).

H. Hirschmüller, P. R. Innocent, and J. Garibaldi, “Real-time correlation-based stereo vision with reduced border errors,” Int. J. Comput. Vis. 47(1–3), 229–246 (2002).

J. E. Ha, “Extrinsic calibration of a camera and laser range finder using a new calibration structure of a plane with a triangular hole,” Int. J. Control Autom. 10(6), 1240–1244 (2012).

M. Bleyer and M. Gelautz, “A layered stereo matching algorithm using image segmentation and global visibility constraints,” ISPRS J. Photogramm. 59(3), 128–150 (2005).

J. Santolaria, J. J. Pastor, F. J. Brosed, and J. J. Aguilar, “A one-step intrinsic and extrinsic calibration method for laser line scanner operation in coordinate measuring machines,” Meas. Sci. Technol. 20(4), 045107 (2009).

A. Glowacz and Z. Glowacz, “Diagnostics of stator faults of the single-phase induction motor using thermal images, moasos and selected classifiers,” Measurement 93, 86–93 (2016).

C. H. Lee, Y. C. Lim, S. Kwon, and J. H. Lee, “Stereo vision-based vehicle detection using a road feature and disparity histogram,” Opt. Eng. 50(2), 027004 (2011).

S. Zhang and P. S. Huang, “Novel method for structured light system calibration,” Opt. Eng. 45(8), 083601 (2006).

C. Wei, C. Sihai, L. Dong, and J. Guohua, “A compact two-dimensional laser scanner based on piezoelectric actuators,” Rev. Sci. Instrum. 86(1), 013102 (2015).

[PubMed]

F. J. Brosed, J. Santolaria, J. J. Aguilar, and D. Guillomía, “Laser triangulation sensor and six axes anthropomorphic robot manipulator modelling for the measurement of complex geometry products,” Robot. Com.- Int. Manuf. 28(6), 660–671 (2012).

J. Santolaria, J. J. Aguilar, D. Guillomía, and C. Cajal, “A crenellated target-based calibration method for laser triangulation sensors integration in articulated measurement arms,” Robot. Com.- Int. Manuf. 27(2), 282–291 (2011).

G. Xu, J. Yuan, X. Li, and J. Su, “3D reconstruction of laser projective point with projection invariant generated from five points on 2D target,” Sci. Rep. 7(1), 7049 (2017).

[PubMed]

J. Nocedal and S. Wright, Numerical optimization (Springer, 2006).

C. Harris and M. Stephens, “A combined corner and edge detector,” in Proceedings of the 4th Alvey Vision Conference (1988), pp. 147–151.

R. Hartley and A. Zisserman, Multiple View Geometry in Computer Vision (Cambridge University, 2003).

O. Faugeras, Q. T. Luong, and T. Papadopoulo, The Geometry of Multiple Images: the Laws that Govern the Formation of Multiple Images of a Scene and Some of Their Applications (MIT, 2004).

Y. I. Abdel-Aziz and H. M. Karara, “Direct linear transformation into object space coordinates in close-range photogrammetry,” in Proceedings of the Symposium on Close-Range Photogrammetry (Falls Church, VA, USA, 1971), pp. 1–18.