650-nm 1 × 2 polymeric thermo-optic switch with low power consumption

C. Chen, C. Han, L. Wang, H. Zhang, X. Sun, F. Wang, and D. Zhang, “650-nm all-polymer thermo-optic waveguide switch arrays based on novel organic-inorganic grafting PMMA material,” IEEE J. Quantum Electron. 49(5), 447–453 (2013).
[Crossref]

Y. Enami, B. Yuan, M. Tanaka, J. Luo, and A. K.-Y. Jen, “Electro-optic polymer/TiO2 multilayer slot waveguide modulators,” Appl. Phys. Lett. 101(12), 123509 (2012).
[Crossref]

C. Garcia, V. Coello, Z. Han, I. P. Radko, and S. I. Bozhevolnyi, “Experimental characterization of dielectric-loaded plasmonic waveguide-racetrack resonators at near-infrared wavelengths,” Appl. Phys. B 107(2), 401–407 (2012).
[Crossref]

K. Peters, “Polymer optical fiber sensors—a review,” Smart Mater. Struct. 20(1), 013002 (2011).
[Crossref]

M. Asai, Y. Inuzuka, K. Koike, S. Takahashi, and Y. Koike, “High-bandwidth graded-index plastic optical fiber with low-attenuation, high-bending ability, and high-thermal stalility for home-networks,” J. Lightwave Technol. 29(11), 1620–1626 (2011).
[Crossref]

P. Sun and R. M. Reano, “Submilliwatt thermo-optic switches using free-standing silicon-on-insulator strip waveguides,” Opt. Express 18(8), 8406–8411 (2010).
[Crossref] [PubMed]

J. S. Kee, D. P. Poenar, P. Neužil, L. Yobaş, and Y. Chen, “Design and fabrication of Poly(dimethylsiloxane) arrayed waveguide grating,” Opt. Express 18(21), 21732–21742 (2010).
[Crossref] [PubMed]

D. Zhang, C. Chen, F. Wang, and D. Zhang, “Optical gain and upconversion luminescence in LaF3: Er, Yb nanoparticles-doped organic-inorganic hybrid material waveguide amplifier,” Appl. Phys. B 98(4), 791–795 (2010).
[Crossref]

G. Hu, B. Yun, Y. Ji, and Y. Cui, “Crosstalk reduced and low power consumption polymeric thermo-optic switch,” Opt. Commun. 283(10), 2133–2135 (2010).
[Crossref]

N. Xie, T. Hashimoto, and K. Utaka, “Very low-power, polarization-independent, and high-speed polymer thermooptic switch,” IEEE Photon. Technol. Lett. 21(24), 1861–1863 (2009).
[Crossref]

Y. Enami, D. Mathine, C. T. DeRose, R. A. Norwood, J. Luo, A. K.-Y. Jen, and N. Peyghambarian, “Hybrid electro-optic polymer/sol-gel waveguide directional coupler switches,” Appl. Phys. Lett. 94(21), 213513 (2009).
[Crossref]

K.-C. D. Cheng, M.-L. V. Tse, G. Zhou, C.-F. J. Pun, W.-K. E. Chan, C. Lu, P. K. A. Wai, and H.-Y. Tam, “Optimization of 3-hole-assisted PMMA optical fiber with double cladding for UV-induced FBG fabrication,” Opt. Express 17(4), 2080–2088 (2009).
[Crossref] [PubMed]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

G. Golojuch, U. Hollenbach, T. Mappes, J. Mohr, A. Urbanczyk, and W. Urbanczyk, “Investigation of birefringence in PMMA channel waveguides inscribed with DUV radiation,” Meas. Sci. Technol. 19(2), 025304 (2008).
[Crossref]

M. Asai, R. Hirose, A. Kondo, and Y. Koike, “High-bandwidth graded-index plastic optical fiber by the dopant diffusion coextrusion process,” J. Lightwave Technol. 25(10), 3062–3067 (2007).
[Crossref]

D. Li, Y. Zhang, L. Liu, and L. Xu, “Low consumption power variable optical attenuator with sol-gel derived organic/inorganic hybrid materials,” Opt. Express 14(13), 6029–6034 (2006).
[Crossref] [PubMed]

M. A. Reilly, B. Coleman, E. Y. B. Pun, R. V. Penty, I. H. White, M. Ramon, R. Xia, and D. D. C. Bradley, “Optical gain at 650 nm from a polymer waveguide with dye-doped cladding,” Appl. Phys. Lett. 87(23), 231116 (2005).
[Crossref]

M. Yonemura, A. Kawasaki, S. Kato, M. Kagami, and Y. Inui, “Polymer waveguide module for visible wavelength division multiplexing plastic optical fiber communication,” Opt. Lett. 30(17), 2206–2208 (2005).
[Crossref] [PubMed]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

R. Wirth, B. Mayer, S. Kugler, and K. Streubel, “Fast LEDs for polymer optical fiber communication at 650 nm,” Proc. SPIE 6013, 60130F (2005).
[Crossref]

X. Dai, J. He, Z. Liu, X. Ai, G. Yang, B. Han, and J. Xu, “Stability of high-bandwidth graded-index polymer optical fiber,” J. Appl. Polym. Sci. 91(4), 2330–2334 (2004).
[Crossref]

H. Y. Tang, W. H. Wong, and E. Y. B. Pun, “Long period polymer waveguide grating device with positive temperature sensitivity,” Appl. Phys. B 79(1), 95–98 (2004).
[Crossref]

G. Giaretta, W. White, M. Wegmuller, and T. Onishi, “High-speed (11 Gbit/s) data transmission using perfluorinated graded-index polymer optical fibers for short interconnects (<100 m),” IEEE Photon. Technol. Lett. 12(3), 347–349 (2000).
[Crossref]

X. Dai, J. He, Z. Liu, X. Ai, G. Yang, B. Han, and J. Xu, “Stability of high-bandwidth graded-index polymer optical fiber,” J. Appl. Polym. Sci. 91(4), 2330–2334 (2004).
[Crossref]

M. Asai, Y. Inuzuka, K. Koike, S. Takahashi, and Y. Koike, “High-bandwidth graded-index plastic optical fiber with low-attenuation, high-bending ability, and high-thermal stalility for home-networks,” J. Lightwave Technol. 29(11), 1620–1626 (2011).
[Crossref]

M. Asai, R. Hirose, A. Kondo, and Y. Koike, “High-bandwidth graded-index plastic optical fiber by the dopant diffusion coextrusion process,” J. Lightwave Technol. 25(10), 3062–3067 (2007).
[Crossref]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

C. Garcia, V. Coello, Z. Han, I. P. Radko, and S. I. Bozhevolnyi, “Experimental characterization of dielectric-loaded plasmonic waveguide-racetrack resonators at near-infrared wavelengths,” Appl. Phys. B 107(2), 401–407 (2012).
[Crossref]

M. A. Reilly, B. Coleman, E. Y. B. Pun, R. V. Penty, I. H. White, M. Ramon, R. Xia, and D. D. C. Bradley, “Optical gain at 650 nm from a polymer waveguide with dye-doped cladding,” Appl. Phys. Lett. 87(23), 231116 (2005).
[Crossref]

K.-C. D. Cheng, M.-L. V. Tse, G. Zhou, C.-F. J. Pun, W.-K. E. Chan, C. Lu, P. K. A. Wai, and H.-Y. Tam, “Optimization of 3-hole-assisted PMMA optical fiber with double cladding for UV-induced FBG fabrication,” Opt. Express 17(4), 2080–2088 (2009).
[Crossref] [PubMed]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

C. Chen, C. Han, L. Wang, H. Zhang, X. Sun, F. Wang, and D. Zhang, “650-nm all-polymer thermo-optic waveguide switch arrays based on novel organic-inorganic grafting PMMA material,” IEEE J. Quantum Electron. 49(5), 447–453 (2013).
[Crossref]

D. Zhang, C. Chen, F. Wang, and D. Zhang, “Optical gain and upconversion luminescence in LaF3: Er, Yb nanoparticles-doped organic-inorganic hybrid material waveguide amplifier,” Appl. Phys. B 98(4), 791–795 (2010).
[Crossref]

J. S. Kee, D. P. Poenar, P. Neužil, L. Yobaş, and Y. Chen, “Design and fabrication of Poly(dimethylsiloxane) arrayed waveguide grating,” Opt. Express 18(21), 21732–21742 (2010).
[Crossref] [PubMed]

K.-C. D. Cheng, M.-L. V. Tse, G. Zhou, C.-F. J. Pun, W.-K. E. Chan, C. Lu, P. K. A. Wai, and H.-Y. Tam, “Optimization of 3-hole-assisted PMMA optical fiber with double cladding for UV-induced FBG fabrication,” Opt. Express 17(4), 2080–2088 (2009).
[Crossref] [PubMed]

C. Garcia, V. Coello, Z. Han, I. P. Radko, and S. I. Bozhevolnyi, “Experimental characterization of dielectric-loaded plasmonic waveguide-racetrack resonators at near-infrared wavelengths,” Appl. Phys. B 107(2), 401–407 (2012).
[Crossref]

M. A. Reilly, B. Coleman, E. Y. B. Pun, R. V. Penty, I. H. White, M. Ramon, R. Xia, and D. D. C. Bradley, “Optical gain at 650 nm from a polymer waveguide with dye-doped cladding,” Appl. Phys. Lett. 87(23), 231116 (2005).
[Crossref]

G. Hu, B. Yun, Y. Ji, and Y. Cui, “Crosstalk reduced and low power consumption polymeric thermo-optic switch,” Opt. Commun. 283(10), 2133–2135 (2010).
[Crossref]

X. Dai, J. He, Z. Liu, X. Ai, G. Yang, B. Han, and J. Xu, “Stability of high-bandwidth graded-index polymer optical fiber,” J. Appl. Polym. Sci. 91(4), 2330–2334 (2004).
[Crossref]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

Y. Enami, D. Mathine, C. T. DeRose, R. A. Norwood, J. Luo, A. K.-Y. Jen, and N. Peyghambarian, “Hybrid electro-optic polymer/sol-gel waveguide directional coupler switches,” Appl. Phys. Lett. 94(21), 213513 (2009).
[Crossref]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

Y. Enami, B. Yuan, M. Tanaka, J. Luo, and A. K.-Y. Jen, “Electro-optic polymer/TiO2 multilayer slot waveguide modulators,” Appl. Phys. Lett. 101(12), 123509 (2012).
[Crossref]

Y. Enami, D. Mathine, C. T. DeRose, R. A. Norwood, J. Luo, A. K.-Y. Jen, and N. Peyghambarian, “Hybrid electro-optic polymer/sol-gel waveguide directional coupler switches,” Appl. Phys. Lett. 94(21), 213513 (2009).
[Crossref]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

C. Garcia, V. Coello, Z. Han, I. P. Radko, and S. I. Bozhevolnyi, “Experimental characterization of dielectric-loaded plasmonic waveguide-racetrack resonators at near-infrared wavelengths,” Appl. Phys. B 107(2), 401–407 (2012).
[Crossref]

G. Giaretta, W. White, M. Wegmuller, and T. Onishi, “High-speed (11 Gbit/s) data transmission using perfluorinated graded-index polymer optical fibers for short interconnects (<100 m),” IEEE Photon. Technol. Lett. 12(3), 347–349 (2000).
[Crossref]

G. Golojuch, U. Hollenbach, T. Mappes, J. Mohr, A. Urbanczyk, and W. Urbanczyk, “Investigation of birefringence in PMMA channel waveguides inscribed with DUV radiation,” Meas. Sci. Technol. 19(2), 025304 (2008).
[Crossref]

X. Dai, J. He, Z. Liu, X. Ai, G. Yang, B. Han, and J. Xu, “Stability of high-bandwidth graded-index polymer optical fiber,” J. Appl. Polym. Sci. 91(4), 2330–2334 (2004).
[Crossref]

C. Chen, C. Han, L. Wang, H. Zhang, X. Sun, F. Wang, and D. Zhang, “650-nm all-polymer thermo-optic waveguide switch arrays based on novel organic-inorganic grafting PMMA material,” IEEE J. Quantum Electron. 49(5), 447–453 (2013).
[Crossref]

C. Garcia, V. Coello, Z. Han, I. P. Radko, and S. I. Bozhevolnyi, “Experimental characterization of dielectric-loaded plasmonic waveguide-racetrack resonators at near-infrared wavelengths,” Appl. Phys. B 107(2), 401–407 (2012).
[Crossref]

N. Xie, T. Hashimoto, and K. Utaka, “Very low-power, polarization-independent, and high-speed polymer thermooptic switch,” IEEE Photon. Technol. Lett. 21(24), 1861–1863 (2009).
[Crossref]

X. Dai, J. He, Z. Liu, X. Ai, G. Yang, B. Han, and J. Xu, “Stability of high-bandwidth graded-index polymer optical fiber,” J. Appl. Polym. Sci. 91(4), 2330–2334 (2004).
[Crossref]

M. Asai, R. Hirose, A. Kondo, and Y. Koike, “High-bandwidth graded-index plastic optical fiber by the dopant diffusion coextrusion process,” J. Lightwave Technol. 25(10), 3062–3067 (2007).
[Crossref]

G. Golojuch, U. Hollenbach, T. Mappes, J. Mohr, A. Urbanczyk, and W. Urbanczyk, “Investigation of birefringence in PMMA channel waveguides inscribed with DUV radiation,” Meas. Sci. Technol. 19(2), 025304 (2008).
[Crossref]

G. Hu, B. Yun, Y. Ji, and Y. Cui, “Crosstalk reduced and low power consumption polymeric thermo-optic switch,” Opt. Commun. 283(10), 2133–2135 (2010).
[Crossref]

M. Yonemura, A. Kawasaki, S. Kato, M. Kagami, and Y. Inui, “Polymer waveguide module for visible wavelength division multiplexing plastic optical fiber communication,” Opt. Lett. 30(17), 2206–2208 (2005).
[Crossref] [PubMed]

M. Asai, Y. Inuzuka, K. Koike, S. Takahashi, and Y. Koike, “High-bandwidth graded-index plastic optical fiber with low-attenuation, high-bending ability, and high-thermal stalility for home-networks,” J. Lightwave Technol. 29(11), 1620–1626 (2011).
[Crossref]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

Y. Enami, B. Yuan, M. Tanaka, J. Luo, and A. K.-Y. Jen, “Electro-optic polymer/TiO2 multilayer slot waveguide modulators,” Appl. Phys. Lett. 101(12), 123509 (2012).
[Crossref]

Y. Enami, D. Mathine, C. T. DeRose, R. A. Norwood, J. Luo, A. K.-Y. Jen, and N. Peyghambarian, “Hybrid electro-optic polymer/sol-gel waveguide directional coupler switches,” Appl. Phys. Lett. 94(21), 213513 (2009).
[Crossref]

G. Hu, B. Yun, Y. Ji, and Y. Cui, “Crosstalk reduced and low power consumption polymeric thermo-optic switch,” Opt. Commun. 283(10), 2133–2135 (2010).
[Crossref]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

M. Yonemura, A. Kawasaki, S. Kato, M. Kagami, and Y. Inui, “Polymer waveguide module for visible wavelength division multiplexing plastic optical fiber communication,” Opt. Lett. 30(17), 2206–2208 (2005).
[Crossref] [PubMed]

M. Yonemura, A. Kawasaki, S. Kato, M. Kagami, and Y. Inui, “Polymer waveguide module for visible wavelength division multiplexing plastic optical fiber communication,” Opt. Lett. 30(17), 2206–2208 (2005).
[Crossref] [PubMed]

M. Yonemura, A. Kawasaki, S. Kato, M. Kagami, and Y. Inui, “Polymer waveguide module for visible wavelength division multiplexing plastic optical fiber communication,” Opt. Lett. 30(17), 2206–2208 (2005).
[Crossref] [PubMed]

J. S. Kee, D. P. Poenar, P. Neužil, L. Yobaş, and Y. Chen, “Design and fabrication of Poly(dimethylsiloxane) arrayed waveguide grating,” Opt. Express 18(21), 21732–21742 (2010).
[Crossref] [PubMed]

M. Asai, Y. Inuzuka, K. Koike, S. Takahashi, and Y. Koike, “High-bandwidth graded-index plastic optical fiber with low-attenuation, high-bending ability, and high-thermal stalility for home-networks,” J. Lightwave Technol. 29(11), 1620–1626 (2011).
[Crossref]

M. Asai, Y. Inuzuka, K. Koike, S. Takahashi, and Y. Koike, “High-bandwidth graded-index plastic optical fiber with low-attenuation, high-bending ability, and high-thermal stalility for home-networks,” J. Lightwave Technol. 29(11), 1620–1626 (2011).
[Crossref]

M. Asai, R. Hirose, A. Kondo, and Y. Koike, “High-bandwidth graded-index plastic optical fiber by the dopant diffusion coextrusion process,” J. Lightwave Technol. 25(10), 3062–3067 (2007).
[Crossref]

M. Asai, R. Hirose, A. Kondo, and Y. Koike, “High-bandwidth graded-index plastic optical fiber by the dopant diffusion coextrusion process,” J. Lightwave Technol. 25(10), 3062–3067 (2007).
[Crossref]

R. Wirth, B. Mayer, S. Kugler, and K. Streubel, “Fast LEDs for polymer optical fiber communication at 650 nm,” Proc. SPIE 6013, 60130F (2005).
[Crossref]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

D. Li, Y. Zhang, L. Liu, and L. Xu, “Low consumption power variable optical attenuator with sol-gel derived organic/inorganic hybrid materials,” Opt. Express 14(13), 6029–6034 (2006).
[Crossref] [PubMed]

D. Li, Y. Zhang, L. Liu, and L. Xu, “Low consumption power variable optical attenuator with sol-gel derived organic/inorganic hybrid materials,” Opt. Express 14(13), 6029–6034 (2006).
[Crossref] [PubMed]

X. Dai, J. He, Z. Liu, X. Ai, G. Yang, B. Han, and J. Xu, “Stability of high-bandwidth graded-index polymer optical fiber,” J. Appl. Polym. Sci. 91(4), 2330–2334 (2004).
[Crossref]

K.-C. D. Cheng, M.-L. V. Tse, G. Zhou, C.-F. J. Pun, W.-K. E. Chan, C. Lu, P. K. A. Wai, and H.-Y. Tam, “Optimization of 3-hole-assisted PMMA optical fiber with double cladding for UV-induced FBG fabrication,” Opt. Express 17(4), 2080–2088 (2009).
[Crossref] [PubMed]

Y. Enami, B. Yuan, M. Tanaka, J. Luo, and A. K.-Y. Jen, “Electro-optic polymer/TiO2 multilayer slot waveguide modulators,” Appl. Phys. Lett. 101(12), 123509 (2012).
[Crossref]

Y. Enami, D. Mathine, C. T. DeRose, R. A. Norwood, J. Luo, A. K.-Y. Jen, and N. Peyghambarian, “Hybrid electro-optic polymer/sol-gel waveguide directional coupler switches,” Appl. Phys. Lett. 94(21), 213513 (2009).
[Crossref]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

G. Golojuch, U. Hollenbach, T. Mappes, J. Mohr, A. Urbanczyk, and W. Urbanczyk, “Investigation of birefringence in PMMA channel waveguides inscribed with DUV radiation,” Meas. Sci. Technol. 19(2), 025304 (2008).
[Crossref]

Y. Enami, D. Mathine, C. T. DeRose, R. A. Norwood, J. Luo, A. K.-Y. Jen, and N. Peyghambarian, “Hybrid electro-optic polymer/sol-gel waveguide directional coupler switches,” Appl. Phys. Lett. 94(21), 213513 (2009).
[Crossref]

R. Wirth, B. Mayer, S. Kugler, and K. Streubel, “Fast LEDs for polymer optical fiber communication at 650 nm,” Proc. SPIE 6013, 60130F (2005).
[Crossref]

G. Golojuch, U. Hollenbach, T. Mappes, J. Mohr, A. Urbanczyk, and W. Urbanczyk, “Investigation of birefringence in PMMA channel waveguides inscribed with DUV radiation,” Meas. Sci. Technol. 19(2), 025304 (2008).
[Crossref]

J. S. Kee, D. P. Poenar, P. Neužil, L. Yobaş, and Y. Chen, “Design and fabrication of Poly(dimethylsiloxane) arrayed waveguide grating,” Opt. Express 18(21), 21732–21742 (2010).
[Crossref] [PubMed]

Y. Enami, D. Mathine, C. T. DeRose, R. A. Norwood, J. Luo, A. K.-Y. Jen, and N. Peyghambarian, “Hybrid electro-optic polymer/sol-gel waveguide directional coupler switches,” Appl. Phys. Lett. 94(21), 213513 (2009).
[Crossref]

G. Giaretta, W. White, M. Wegmuller, and T. Onishi, “High-speed (11 Gbit/s) data transmission using perfluorinated graded-index polymer optical fibers for short interconnects (<100 m),” IEEE Photon. Technol. Lett. 12(3), 347–349 (2000).
[Crossref]

M. A. Reilly, B. Coleman, E. Y. B. Pun, R. V. Penty, I. H. White, M. Ramon, R. Xia, and D. D. C. Bradley, “Optical gain at 650 nm from a polymer waveguide with dye-doped cladding,” Appl. Phys. Lett. 87(23), 231116 (2005).
[Crossref]

K. Peters, “Polymer optical fiber sensors—a review,” Smart Mater. Struct. 20(1), 013002 (2011).
[Crossref]

Y. Enami, D. Mathine, C. T. DeRose, R. A. Norwood, J. Luo, A. K.-Y. Jen, and N. Peyghambarian, “Hybrid electro-optic polymer/sol-gel waveguide directional coupler switches,” Appl. Phys. Lett. 94(21), 213513 (2009).
[Crossref]

J. S. Kee, D. P. Poenar, P. Neužil, L. Yobaş, and Y. Chen, “Design and fabrication of Poly(dimethylsiloxane) arrayed waveguide grating,” Opt. Express 18(21), 21732–21742 (2010).
[Crossref] [PubMed]

K.-C. D. Cheng, M.-L. V. Tse, G. Zhou, C.-F. J. Pun, W.-K. E. Chan, C. Lu, P. K. A. Wai, and H.-Y. Tam, “Optimization of 3-hole-assisted PMMA optical fiber with double cladding for UV-induced FBG fabrication,” Opt. Express 17(4), 2080–2088 (2009).
[Crossref] [PubMed]

M. A. Reilly, B. Coleman, E. Y. B. Pun, R. V. Penty, I. H. White, M. Ramon, R. Xia, and D. D. C. Bradley, “Optical gain at 650 nm from a polymer waveguide with dye-doped cladding,” Appl. Phys. Lett. 87(23), 231116 (2005).
[Crossref]

H. Y. Tang, W. H. Wong, and E. Y. B. Pun, “Long period polymer waveguide grating device with positive temperature sensitivity,” Appl. Phys. B 79(1), 95–98 (2004).
[Crossref]

C. Garcia, V. Coello, Z. Han, I. P. Radko, and S. I. Bozhevolnyi, “Experimental characterization of dielectric-loaded plasmonic waveguide-racetrack resonators at near-infrared wavelengths,” Appl. Phys. B 107(2), 401–407 (2012).
[Crossref]

M. A. Reilly, B. Coleman, E. Y. B. Pun, R. V. Penty, I. H. White, M. Ramon, R. Xia, and D. D. C. Bradley, “Optical gain at 650 nm from a polymer waveguide with dye-doped cladding,” Appl. Phys. Lett. 87(23), 231116 (2005).
[Crossref]

P. Sun and R. M. Reano, “Submilliwatt thermo-optic switches using free-standing silicon-on-insulator strip waveguides,” Opt. Express 18(8), 8406–8411 (2010).
[Crossref] [PubMed]

M. A. Reilly, B. Coleman, E. Y. B. Pun, R. V. Penty, I. H. White, M. Ramon, R. Xia, and D. D. C. Bradley, “Optical gain at 650 nm from a polymer waveguide with dye-doped cladding,” Appl. Phys. Lett. 87(23), 231116 (2005).
[Crossref]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

R. Wirth, B. Mayer, S. Kugler, and K. Streubel, “Fast LEDs for polymer optical fiber communication at 650 nm,” Proc. SPIE 6013, 60130F (2005).
[Crossref]

P. Sun and R. M. Reano, “Submilliwatt thermo-optic switches using free-standing silicon-on-insulator strip waveguides,” Opt. Express 18(8), 8406–8411 (2010).
[Crossref] [PubMed]

C. Chen, C. Han, L. Wang, H. Zhang, X. Sun, F. Wang, and D. Zhang, “650-nm all-polymer thermo-optic waveguide switch arrays based on novel organic-inorganic grafting PMMA material,” IEEE J. Quantum Electron. 49(5), 447–453 (2013).
[Crossref]

M. Asai, Y. Inuzuka, K. Koike, S. Takahashi, and Y. Koike, “High-bandwidth graded-index plastic optical fiber with low-attenuation, high-bending ability, and high-thermal stalility for home-networks,” J. Lightwave Technol. 29(11), 1620–1626 (2011).
[Crossref]

K.-C. D. Cheng, M.-L. V. Tse, G. Zhou, C.-F. J. Pun, W.-K. E. Chan, C. Lu, P. K. A. Wai, and H.-Y. Tam, “Optimization of 3-hole-assisted PMMA optical fiber with double cladding for UV-induced FBG fabrication,” Opt. Express 17(4), 2080–2088 (2009).
[Crossref] [PubMed]

Y. Enami, B. Yuan, M. Tanaka, J. Luo, and A. K.-Y. Jen, “Electro-optic polymer/TiO2 multilayer slot waveguide modulators,” Appl. Phys. Lett. 101(12), 123509 (2012).
[Crossref]

H. Y. Tang, W. H. Wong, and E. Y. B. Pun, “Long period polymer waveguide grating device with positive temperature sensitivity,” Appl. Phys. B 79(1), 95–98 (2004).
[Crossref]

K.-C. D. Cheng, M.-L. V. Tse, G. Zhou, C.-F. J. Pun, W.-K. E. Chan, C. Lu, P. K. A. Wai, and H.-Y. Tam, “Optimization of 3-hole-assisted PMMA optical fiber with double cladding for UV-induced FBG fabrication,” Opt. Express 17(4), 2080–2088 (2009).
[Crossref] [PubMed]

G. Golojuch, U. Hollenbach, T. Mappes, J. Mohr, A. Urbanczyk, and W. Urbanczyk, “Investigation of birefringence in PMMA channel waveguides inscribed with DUV radiation,” Meas. Sci. Technol. 19(2), 025304 (2008).
[Crossref]

G. Golojuch, U. Hollenbach, T. Mappes, J. Mohr, A. Urbanczyk, and W. Urbanczyk, “Investigation of birefringence in PMMA channel waveguides inscribed with DUV radiation,” Meas. Sci. Technol. 19(2), 025304 (2008).
[Crossref]

N. Xie, T. Hashimoto, and K. Utaka, “Very low-power, polarization-independent, and high-speed polymer thermooptic switch,” IEEE Photon. Technol. Lett. 21(24), 1861–1863 (2009).
[Crossref]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

K.-C. D. Cheng, M.-L. V. Tse, G. Zhou, C.-F. J. Pun, W.-K. E. Chan, C. Lu, P. K. A. Wai, and H.-Y. Tam, “Optimization of 3-hole-assisted PMMA optical fiber with double cladding for UV-induced FBG fabrication,” Opt. Express 17(4), 2080–2088 (2009).
[Crossref] [PubMed]

C. Chen, C. Han, L. Wang, H. Zhang, X. Sun, F. Wang, and D. Zhang, “650-nm all-polymer thermo-optic waveguide switch arrays based on novel organic-inorganic grafting PMMA material,” IEEE J. Quantum Electron. 49(5), 447–453 (2013).
[Crossref]

D. Zhang, C. Chen, F. Wang, and D. Zhang, “Optical gain and upconversion luminescence in LaF3: Er, Yb nanoparticles-doped organic-inorganic hybrid material waveguide amplifier,” Appl. Phys. B 98(4), 791–795 (2010).
[Crossref]

C. Chen, C. Han, L. Wang, H. Zhang, X. Sun, F. Wang, and D. Zhang, “650-nm all-polymer thermo-optic waveguide switch arrays based on novel organic-inorganic grafting PMMA material,” IEEE J. Quantum Electron. 49(5), 447–453 (2013).
[Crossref]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

G. Giaretta, W. White, M. Wegmuller, and T. Onishi, “High-speed (11 Gbit/s) data transmission using perfluorinated graded-index polymer optical fibers for short interconnects (<100 m),” IEEE Photon. Technol. Lett. 12(3), 347–349 (2000).
[Crossref]

M. A. Reilly, B. Coleman, E. Y. B. Pun, R. V. Penty, I. H. White, M. Ramon, R. Xia, and D. D. C. Bradley, “Optical gain at 650 nm from a polymer waveguide with dye-doped cladding,” Appl. Phys. Lett. 87(23), 231116 (2005).
[Crossref]

G. Giaretta, W. White, M. Wegmuller, and T. Onishi, “High-speed (11 Gbit/s) data transmission using perfluorinated graded-index polymer optical fibers for short interconnects (<100 m),” IEEE Photon. Technol. Lett. 12(3), 347–349 (2000).
[Crossref]

R. Wirth, B. Mayer, S. Kugler, and K. Streubel, “Fast LEDs for polymer optical fiber communication at 650 nm,” Proc. SPIE 6013, 60130F (2005).
[Crossref]

H. Y. Tang, W. H. Wong, and E. Y. B. Pun, “Long period polymer waveguide grating device with positive temperature sensitivity,” Appl. Phys. B 79(1), 95–98 (2004).
[Crossref]

M. A. Reilly, B. Coleman, E. Y. B. Pun, R. V. Penty, I. H. White, M. Ramon, R. Xia, and D. D. C. Bradley, “Optical gain at 650 nm from a polymer waveguide with dye-doped cladding,” Appl. Phys. Lett. 87(23), 231116 (2005).
[Crossref]

N. Xie, T. Hashimoto, and K. Utaka, “Very low-power, polarization-independent, and high-speed polymer thermooptic switch,” IEEE Photon. Technol. Lett. 21(24), 1861–1863 (2009).
[Crossref]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

X. Dai, J. He, Z. Liu, X. Ai, G. Yang, B. Han, and J. Xu, “Stability of high-bandwidth graded-index polymer optical fiber,” J. Appl. Polym. Sci. 91(4), 2330–2334 (2004).
[Crossref]

D. Li, Y. Zhang, L. Liu, and L. Xu, “Low consumption power variable optical attenuator with sol-gel derived organic/inorganic hybrid materials,” Opt. Express 14(13), 6029–6034 (2006).
[Crossref] [PubMed]

X. Dai, J. He, Z. Liu, X. Ai, G. Yang, B. Han, and J. Xu, “Stability of high-bandwidth graded-index polymer optical fiber,” J. Appl. Polym. Sci. 91(4), 2330–2334 (2004).
[Crossref]

J. S. Kee, D. P. Poenar, P. Neužil, L. Yobaş, and Y. Chen, “Design and fabrication of Poly(dimethylsiloxane) arrayed waveguide grating,” Opt. Express 18(21), 21732–21742 (2010).
[Crossref] [PubMed]

M. Yonemura, A. Kawasaki, S. Kato, M. Kagami, and Y. Inui, “Polymer waveguide module for visible wavelength division multiplexing plastic optical fiber communication,” Opt. Lett. 30(17), 2206–2208 (2005).
[Crossref] [PubMed]

Y. Enami, B. Yuan, M. Tanaka, J. Luo, and A. K.-Y. Jen, “Electro-optic polymer/TiO2 multilayer slot waveguide modulators,” Appl. Phys. Lett. 101(12), 123509 (2012).
[Crossref]

G. Hu, B. Yun, Y. Ji, and Y. Cui, “Crosstalk reduced and low power consumption polymeric thermo-optic switch,” Opt. Commun. 283(10), 2133–2135 (2010).
[Crossref]

C. Chen, C. Han, L. Wang, H. Zhang, X. Sun, F. Wang, and D. Zhang, “650-nm all-polymer thermo-optic waveguide switch arrays based on novel organic-inorganic grafting PMMA material,” IEEE J. Quantum Electron. 49(5), 447–453 (2013).
[Crossref]

D. Zhang, C. Chen, F. Wang, and D. Zhang, “Optical gain and upconversion luminescence in LaF3: Er, Yb nanoparticles-doped organic-inorganic hybrid material waveguide amplifier,” Appl. Phys. B 98(4), 791–795 (2010).
[Crossref]

D. Zhang, C. Chen, F. Wang, and D. Zhang, “Optical gain and upconversion luminescence in LaF3: Er, Yb nanoparticles-doped organic-inorganic hybrid material waveguide amplifier,” Appl. Phys. B 98(4), 791–795 (2010).
[Crossref]

C. Chen, C. Han, L. Wang, H. Zhang, X. Sun, F. Wang, and D. Zhang, “650-nm all-polymer thermo-optic waveguide switch arrays based on novel organic-inorganic grafting PMMA material,” IEEE J. Quantum Electron. 49(5), 447–453 (2013).
[Crossref]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

D. Li, Y. Zhang, L. Liu, and L. Xu, “Low consumption power variable optical attenuator with sol-gel derived organic/inorganic hybrid materials,” Opt. Express 14(13), 6029–6034 (2006).
[Crossref] [PubMed]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

K.-C. D. Cheng, M.-L. V. Tse, G. Zhou, C.-F. J. Pun, W.-K. E. Chan, C. Lu, P. K. A. Wai, and H.-Y. Tam, “Optimization of 3-hole-assisted PMMA optical fiber with double cladding for UV-induced FBG fabrication,” Opt. Express 17(4), 2080–2088 (2009).
[Crossref] [PubMed]

D. Zhang, C. Chen, F. Wang, and D. Zhang, “Optical gain and upconversion luminescence in LaF3: Er, Yb nanoparticles-doped organic-inorganic hybrid material waveguide amplifier,” Appl. Phys. B 98(4), 791–795 (2010).
[Crossref]

H. Y. Tang, W. H. Wong, and E. Y. B. Pun, “Long period polymer waveguide grating device with positive temperature sensitivity,” Appl. Phys. B 79(1), 95–98 (2004).
[Crossref]

C. Garcia, V. Coello, Z. Han, I. P. Radko, and S. I. Bozhevolnyi, “Experimental characterization of dielectric-loaded plasmonic waveguide-racetrack resonators at near-infrared wavelengths,” Appl. Phys. B 107(2), 401–407 (2012).
[Crossref]

Y. Enami, D. Mathine, C. T. DeRose, R. A. Norwood, J. Luo, A. K.-Y. Jen, and N. Peyghambarian, “Hybrid electro-optic polymer/sol-gel waveguide directional coupler switches,” Appl. Phys. Lett. 94(21), 213513 (2009).
[Crossref]

Y. Enami, B. Yuan, M. Tanaka, J. Luo, and A. K.-Y. Jen, “Electro-optic polymer/TiO2 multilayer slot waveguide modulators,” Appl. Phys. Lett. 101(12), 123509 (2012).
[Crossref]

M. A. Reilly, B. Coleman, E. Y. B. Pun, R. V. Penty, I. H. White, M. Ramon, R. Xia, and D. D. C. Bradley, “Optical gain at 650 nm from a polymer waveguide with dye-doped cladding,” Appl. Phys. Lett. 87(23), 231116 (2005).
[Crossref]

C. Chen, C. Han, L. Wang, H. Zhang, X. Sun, F. Wang, and D. Zhang, “650-nm all-polymer thermo-optic waveguide switch arrays based on novel organic-inorganic grafting PMMA material,” IEEE J. Quantum Electron. 49(5), 447–453 (2013).
[Crossref]

N. Xie, T. Hashimoto, and K. Utaka, “Very low-power, polarization-independent, and high-speed polymer thermooptic switch,” IEEE Photon. Technol. Lett. 21(24), 1861–1863 (2009).
[Crossref]

G. Giaretta, W. White, M. Wegmuller, and T. Onishi, “High-speed (11 Gbit/s) data transmission using perfluorinated graded-index polymer optical fibers for short interconnects (<100 m),” IEEE Photon. Technol. Lett. 12(3), 347–349 (2000).
[Crossref]

X. Dai, J. He, Z. Liu, X. Ai, G. Yang, B. Han, and J. Xu, “Stability of high-bandwidth graded-index polymer optical fiber,” J. Appl. Polym. Sci. 91(4), 2330–2334 (2004).
[Crossref]

M. Asai, R. Hirose, A. Kondo, and Y. Koike, “High-bandwidth graded-index plastic optical fiber by the dopant diffusion coextrusion process,” J. Lightwave Technol. 25(10), 3062–3067 (2007).
[Crossref]

M. Asai, Y. Inuzuka, K. Koike, S. Takahashi, and Y. Koike, “High-bandwidth graded-index plastic optical fiber with low-attenuation, high-bending ability, and high-thermal stalility for home-networks,” J. Lightwave Technol. 29(11), 1620–1626 (2011).
[Crossref]

G. Golojuch, U. Hollenbach, T. Mappes, J. Mohr, A. Urbanczyk, and W. Urbanczyk, “Investigation of birefringence in PMMA channel waveguides inscribed with DUV radiation,” Meas. Sci. Technol. 19(2), 025304 (2008).
[Crossref]

G. Hu, B. Yun, Y. Ji, and Y. Cui, “Crosstalk reduced and low power consumption polymeric thermo-optic switch,” Opt. Commun. 283(10), 2133–2135 (2010).
[Crossref]

K.-C. D. Cheng, M.-L. V. Tse, G. Zhou, C.-F. J. Pun, W.-K. E. Chan, C. Lu, P. K. A. Wai, and H.-Y. Tam, “Optimization of 3-hole-assisted PMMA optical fiber with double cladding for UV-induced FBG fabrication,” Opt. Express 17(4), 2080–2088 (2009).
[Crossref] [PubMed]

A. Densmore, S. Janz, R. Ma, J. H. Schmid, D.-X. Xu, A. Delâge, J. Lapointe, M. Vachon, and P. Cheben, “Compact and low power thermo-optic switch using folded silicon waveguides,” Opt. Express 17(13), 10457–10465 (2009).
[Crossref] [PubMed]

P. Sun and R. M. Reano, “Submilliwatt thermo-optic switches using free-standing silicon-on-insulator strip waveguides,” Opt. Express 18(8), 8406–8411 (2010).
[Crossref] [PubMed]

J. S. Kee, D. P. Poenar, P. Neužil, L. Yobaş, and Y. Chen, “Design and fabrication of Poly(dimethylsiloxane) arrayed waveguide grating,” Opt. Express 18(21), 21732–21742 (2010).
[Crossref] [PubMed]

D. Li, Y. Zhang, L. Liu, and L. Xu, “Low consumption power variable optical attenuator with sol-gel derived organic/inorganic hybrid materials,” Opt. Express 14(13), 6029–6034 (2006).
[Crossref] [PubMed]

M. Yonemura, A. Kawasaki, S. Kato, M. Kagami, and Y. Inui, “Polymer waveguide module for visible wavelength division multiplexing plastic optical fiber communication,” Opt. Lett. 30(17), 2206–2208 (2005).
[Crossref] [PubMed]

M. Silva-López, A. Fender, W. N. MacPherson, J. S. Barton, J. D. C. Jones, D. Zhao, H. Dobb, D. J. Webb, L. Zhang, and I. Bennion, “Strain and temperature sensitivity of a single-mode polymer optical fiber,” Opt. Lett. 30(23), 3129–3131 (2005).
[Crossref] [PubMed]

R. Wirth, B. Mayer, S. Kugler, and K. Streubel, “Fast LEDs for polymer optical fiber communication at 650 nm,” Proc. SPIE 6013, 60130F (2005).
[Crossref]

K. Peters, “Polymer optical fiber sensors—a review,” Smart Mater. Struct. 20(1), 013002 (2011).
[Crossref]