With the use of laser-induced breakdown spectroscopy (LIBS), the effects of chemical speciation and matrix composition on Pb and Ba measurements have been investigated by using sand and soil matrices. A cylindrical lens was used to focus the laser pulses on the samples because it yielded higher measurement precision than a spherical lens for the experimental conditions used here. The detection limits for Pb and Ba spiked in a sand matrix were 17 and 76 ppm (w/w), respectively. In spiked soil, the detection limits were 57 and 42 ppm (w/w) for Pb and Ba, respectively. Measurement precision for five replicate measurements was typically 10% RSD or less. Two factors were found to influence emissions from Pb and Ba present in sand and soil matrices as crystalline compounds: (1) compound speciation, where Ba emission intensities varied in the order carbonate > oxide > sulfate > chloride > nitrate, and where Pb emission intensities varied in the order oxide > carbonate > chloride > sulfate > nitrate; and (2) the composition of the bulk sample matrix. Emissions from Ba(II) correlated inversely with the plasma electron density, which in turn was dependent upon the percent sand in a sand/soil mixture. The analytical results obtained here show that a field-screening instrument based on LIBS would be useful for the initial screening of soils contaminated with Pb and Ba.

PDF Article

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
Login to access OSA Member Subscription