The objective of this paper is to describe a full-field deformation measurement method based on 3D speckle displacements. The deformation is evaluated from the slope of the speckle displacement function that connects the different reconstruction planes. For our experiment, a symmetrical arrangement with four illuminations parallel to the planes and was used. Four sets of speckle patterns were sequentially recorded by illuminating an object from the four directions, respectively. A single camera is used to record the holograms before and after deformations. Digital speckle photography is then used to calculate relative speckle displacements in each direction between two numerically propagated planes. The 3D speckle displacements vector is calculated as a combination of the speckle displacements from the holograms recorded in each illumination direction. Using the speckle displacements, problems associated with rigid body movements and phase wrapping are avoided. In our experiment, the procedure is shown to give the theoretical accuracy of 0.17 pixels yielding the accuracy of in the measurement of deformation gradients.
© 2016 Optical Society of AmericaFull Article | PDF Article
OSA Recommended Articles
Appl. Opt. 42(34) 6783-6796 (2003)
Thomas Fricke-Begemann and Jan Burke
Appl. Opt. 40(28) 5011-5022 (2001)
Markus Dekiff, Philipp Berssenbrügge, Björn Kemper, Cornelia Denz, and Dieter Dirksen
Biomed. Opt. Express 6(12) 4825-4840 (2015)