Development of a laser scanning microscope for simultaneous three-dimensional imaging in both a full-field laser scanning mode (FLSM) and a confocal laser scanning mode (CLSM) permits the direct comparison of axial resolution and out-of-focus background rejection as a function of sample thickness for both FLSM and CLSM with varying detector aperture (pinhole) radii. The sample-dependent detector aperture radii that optimize the signal-to-noise ratio (S/N) in the CLSM are experimentally determined.
The results verify earlier calculations [ Appl. Opt. 33, 603 ( 1994)]. Using these results, we discuss the practical and theoretical limits on the S/N in the CLSM and compare them with those of a full-field epifluorescence microscope (FEM) that is enhanced by image deconvolution. The specimen volume over which the FLSM exhibits imaging properties that are equivalent to a FEM is calculated in the appendices.
© 1995 Optical Society of AmericaFull Article | PDF Article
OSA Recommended Articles
David R. Sandison and Watt W. Webb
Appl. Opt. 33(4) 603-615 (1994)
José-Angel Conchello, John J. Kim, and Eric W. Hansen
Appl. Opt. 33(17) 3740-3750 (1994)
Tao He, Yasheng Sun, Jin Qi, Jie Hu, and Haiqing Huang
Appl. Opt. 58(14) 3754-3766 (2019)