Abstract
Surface structure modification is an effective way to enhance light extraction of LED. In this study, light extraction microstructure (LEM) at the chip surface manufactured by micro cutting was proposed. Micro cutting experimental system was built, the material deformation during cutting, influence of cutting depth and distance, phenomenon happened with two direction cross cutting were studied. With micro cutting, the plastic cutting of GaN materials can be realized. The cutting force increase linearly while the cutting depth increase. The cutting distance ahould 1.5 times larger than the groove depth. Same depth on two cutting direction should be used.
© 2017 Optical Society of America
PDF ArticleMore Like This
Yao Lung Hsieh, S. Y. Kuo, and Fang-I Lai
TUP2_20 Conference on Lasers and Electro-Optics/Pacific Rim (CLEO/PR) 2009
S. J. Chang
AS1F.4 Asia Communications and Photonics Conference (ACP) 2012
Zetian Mi, Xianhe Liu, Srinivas Vanka, and Baowen Zhou
PW1C.2 Optical Devices and Materials for Solar Energy and Solid-state Lighting (SOLED) 2019